Product Inquiry

*Note: Please fill in the information accurately and keep your phone accessible. We will contact you as soon as possible.

Submit

An Analysis of the Real Differences Between Standard and Non-Standard Cables

2019-05-10

Author:

Minglei Cable


Cost is calculated based on the weight of copper. Initially, it seemed effective, but one key issue was overlooked in compliance with national standards: your copper is oxygen-free rod, whereas non‑standard products are not. When the weights of scrap copper and oxygen‑free rod are identical, their prices differ by 10%. Consequently, despite extensive promotional efforts, the national‑standard cable campaign failed; there remains a guaranteed 10% price gap between standard and non‑standard products.

Over the years, cable industry professionals have become all too familiar with a sensitive issue: it has become extremely difficult to sell cables that meet national standards. Everyone claims their cables comply with national standards, and even non‑standard products are marketed as such, giving them a significant pricing advantage. This situation has left many in the cable market feeling genuinely frustrated.

What exactly are the real differences between standard‑compliant cables and non‑standard cables? We can gain a detailed understanding by examining the following points:

1. Cost is calculated based on the weight of copper. Initially, this approach seemed effective, but it overlooks one key issue when complying with national standards: your copper is oxygen-free rod, whereas non‑standard products are not. When the weights of scrap copper and oxygen‑free rod are identical, their prices differ by 10%. Consequently, despite extensive promotional efforts, the national standard for cables ultimately failed; there remains a guaranteed minimum price gap of 10% between national‑standard and non‑standard products.

2. Cutting corners on auxiliary materials. With the state tightening inspections of resistors and increasing scrutiny of standard products, non‑standard cables are once again focusing on substandard auxiliary materials. If copper accounts for about 70% of a cable’s cost, auxiliary materials make up roughly 20%; even a slight downgrade in these materials can widen the price gap with compliant, national‑standard cables by around 5%. As you’ve seen, many of the recently exposed cable failures stem from issues with auxiliary materials.

3. Short meters of wire to short meters of cable. In fact, the issue of shortened lengths has always existed and is the hardest to detect. It used to be common with BV wire—e.g., 95-meter runs, 98-meter runs, or even 90-meter lengths. Now that inspection criteria have increased and all products are subject to thorough checks, non‑standard manufacturers are once again focusing on this area. Please pay attention: reducing a 100‑meter run by just one meter can yield a 1% profit margin.

4. Thick at both ends and thin in the middle. In other words, the cable sections at both ends meet national standards, while the middle section is non‑standard, which cuts costs significantly and results in a much lower price. You can’t exactly cut the cable in half to test it, so this is how the loophole is exploited.

At present, the fourth issue is the most concerning; as long as the end‑users and cable manufacturers collude to conceal it, there’s simply no way to detect. Are we supposed to dig up the cables from underground just to take measurements? This is also why, even though they’re all supposedly “national standard,” their prices can vary so widely.


Online Feedback

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Related posts


In-depth Analysis of the Working Principle of Aluminum Alloy Cables: A Practical Technical Guide for Selecting Safe Wiring Solutions in Industrial and Civil Applications by 2026

This paper focuses on the core operating principles of aluminum alloy cables, dissecting their technical underpinnings across four dimensions: conductor modification, current-carrying and transmission, structural protection, and thermal stability and conduction. Drawing on publicly available test data from China’s cable industry in 2026, it outlines applicable scenarios and common selection pitfalls, offering practical technical guidance for wiring projects in the construction, industrial, and new energy sectors. Throughout, the presentation remains objective, avoiding exaggerated claims.