Inspection and Test Report-3
| Serial number | Major Category | Test Items | Unit | Technical Requirements | Test Results | Single-item judgment |
| 3 | Electrical performance | Conductor resistance at 20°C | Ω/km | Maximum 0.0470 | 0.0458, 0.0459, 0.0458 | Qualified |
| Electrical performance | Bending and Subsequent Partial Discharge Test — Partial Discharge Quantity (1.73U₀) | pC | At 1.73U₀, there shall be no detectable partial discharge from the test cable exceeding the declared test sensitivity. | √, √, √ | Qualified | |
| Electrical performance | tanδ measurement (95℃~100℃, ≥2kV) | — | Maximum 0.0080 | 0.0027, 0.0029, 0.0031 | Qualified | |
| Electrical performance | Heating cycle and subsequent partial discharge test — Partial discharge quantity (1.73U₀) | pC | At 1.73U₀, there shall be no detectable partial discharge from the test cable exceeding the declared test sensitivity. | √, √, √ | Qualified | |
| Electrical performance | Impulse Voltage Test (95 kV, 95°C to 100°C, 10 positive and 10 negative cycles) | — | No breakdown | √, √, √ | Qualified | |
| Electrical performance | Power-frequency voltage test after impulse voltage (30.5 kV, 15 min) | — | No breakdown | √, √, √ | Qualified | |
| Electrical performance | 4h Voltage Test (4U₀) | — | No breakdown | √, √, √ | Qualified | |
| Electrical performance | Resistivity of the conductor shield before aging (90±2℃) | Ω·m | Up to 1000 | 131, 120, 127 | Qualified | |
| Electrical performance | Resistivity of Conductor Shielding After Aging (100±2℃, 7×24h) | Ω·m | Up to 1000 | 115, 109, 122 | Qualified | |
| Electrical performance | Insulation Shield Resistivity Before Aging (90±2℃) | Ω·m | Up to 500 | 109, 110, 107 | Qualified | |
| Electrical performance | Insulation Shield Resistivity After Aging (100±2℃, 7×24h) | Ω·m | Up to 500 | 98, 101, 93 | Qualified | |
| 4 | Insulation Mechanical Properties | Tensile strength before aging (stretching speed: 250 mm/min) | N/mm² | Minimum 12.5 | 22.4, 21.9, 22.6 | Qualified |
| Insulation Mechanical Properties | Elongation at break before aging | % | Minimum 200 | 470, 450, 450 | Qualified | |
| Insulation Mechanical Properties | Tensile strength after air oven aging (135±3℃, 168h) | N/mm² | — | 21.0, 19.9, 20.6 | — | |
| Insulation Mechanical Properties | Rate of change in tensile strength before and after air oven aging | — | Maximum ±25 | -6, -9, -9 | Qualified | |
| Insulation Mechanical Properties | Elongation at break after air oven aging (135±3℃, 168h) | % | — | 440, 430, 440 | — | |
| Insulation Mechanical Properties | Rate of change in elongation at break before and after air oven aging | — | Maximum ±25 | -6, -4, -2 | Qualified |
* Click to search for the product you want to learn about
All
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
The company primarily manufactures ten major product series, including RVVZ‑series communication and mining cables, power cables, control cables, flame‑retardant and fire‑resistant cables, rubber‑sheathed cables, shielded cables, high‑ and low‑voltage insulated overhead conductors, pre‑branch cables, mining cables, and various types of bare wires.
Leave a Message Online
If you are interested in our products and services, please contact us.