Classification, Differences, and Manufacturing Processes of High-Voltage Cable Terminations
High-voltage cable joints are an essential component of cable lines, used to connect two high-voltage cables and improve the electric field at their ends. They sometimes also include cable termination connectors and connectors at both ends of the cable, which are used to link other equipment and circuits. This will help you understand the manufacturing process of high-voltage cable joints.
The design principles for all cross-linked cable terminations should adhere to the principle of restoring the cable’s original structure. Accordingly, the connector design should comply with China’s GB 12706‑4 and IEC 60502‑4:1997 electrical standards, meeting the required electrical, physical, and chemical performance criteria to ensure the long-term reliable operation of the cable termination and the safe operation of electrical equipment.
High-voltage cables are components that connect the cable to other electrical equipment, and the joint materials at the terminal ends are referred to as cable accessories. Cable accessories should be as safe as the cable body itself over the long term and have a service life comparable to that of the cable. Good cable accessories should provide reliable conductor connections, characterized primarily by low connection resistance, stable joints, and the ability to withstand fault current surges; after prolonged operation, the contact resistance must not exceed 1.2 times the resistance of an equivalent length of cable body.
Common workflows include:
I. Cold-shrink cable termination terminals.
Heat-shrink cable termination.
c. Specialized plug-in equipment for high-voltage cables (typically connected to device-specific sockets; commonly used in special environments—such as tunnels—where working conditions are complex, cable accessory fabrication is inconvenient, and voltage levels are low).
d. High-voltage cable junction boxes (for cable connections or cable branching; 2-, 3-, and 10-kV junction boxes)
Cable terminations have stringent requirements for waterproofing, moisture resistance, and gas tightness; the accessories for fully cold-shrink power cables are essentially elastic cable accessories. They exhibit excellent elasticity, which helps prevent insulation breakdown caused by thermal expansion and contraction of high-voltage cables under operating conditions—phenomena driven by atmospheric changes and load variations, often referred to as “cable breathing.” By contrast, heat-shrink accessories lack elasticity and cannot accommodate the cable’s breathing movements. Fully shrink-fit accessories are better suited than heat-shrink cable terminations for regions with large temperature swings and harsh climatic conditions.
Related posts